• MAX2683EUE+T Quick View
    • MAX2683EUE+T Quick View

    • MAX2683EUE+T

    • €0.96
    • MAX2683 - 3.5GHz Downconverter Mixers with Selectable LO Doubler The MAX2683/MAX2684 are super-high-performance, low-cost downconverter mixers intended for wireless local loop (WLL) and digital microwave radio (DMR) applications in the 3.4GHz to 3.8GHz frequency band. The MAX2683 is optimized for downconversion to IF frequencies between 100MHz and 400MHz, and allows both high-side and low-side local oscillator (LO) injection. The MAX2684…
    • Add to cart
  • MAX2991ECM+ Quick View
    • MAX2991ECM+ Quick View

    • MAX2991ECM+

    • €2.48
    • MAX2991 Power-Line Communications (PLC) Integrated Analog Front-End Transceiver The MAX2991 power-line communication analog front-end (AFE) is a state-of-the-art integrated circuit that delivers high integration and superb performance, while reducing the total system cost. The MAX2991 is the first AFE specifically designed for OFDM (orthogonal frequency division multiplexing) modulated signal transmission over power lines. Operating in the 10kHz to 490kHz band,…
    • Add to cart
  • MAX2992ECB+ Quick View
    • MAX2992ECB+ Quick View

    • MAX2992ECB+

    • €2.92
    • Network Controller & Processor ICs G3-PLC MAC/PHY Powerline Transceiver 100PCS MOQ TRAY / ORDER MULTIPLE 100PCS TRAY Price Quantity Quantity 1 – 24 = €2.92 Quantity 25 – 99 = €2.72 Quantity 100 – 499 = €2.54 Quantity 500 + = €2.38
    • Add to cart
  • MAX3013EUP+ Quick View
    • MAX3013EUP+ Quick View

    • MAX3013EUP+

    • €2.57
    • MAX3013 +1.2V to +3.6V, 0.1µA, 100Mbps, 8-Channel Level Translators The MAX3013 8-channel level translator provides the level shifting necessary to allow 100Mbps data transfer in a multivoltage system. Externally applied voltages, VCC and VL, set the logic levels on either side of the device. Logic signals present on the VL side of the device appear as a higher voltage logic…
    • Add to cart
  • MAX3080CSD+ Quick View
    • MAX3080CSD+ Quick View

    • MAX3080CSD+

    • €0.77
    • MAX3080 Fail-Safe, High-Speed (10Mbps), Slew-Rate-Limited RS-485/RS-422 Transceivers The MAX3080-MAX3089 high-speed transceivers for RS-485/RS-422 communication contain one driver and one receiver. These devices feature fail-safe circuitry, which guarantees a logic-high receiver output when the receiver inputs are open or shorted. This means that the receiver output will be a logic high if all transmitters on a terminated bus are disabled (high…
    • Add to cart
  • MAX3080EESD+ Quick View
    • MAX3080EESD+ Quick View

    • MAX3080EESD+

    • €0.98
    • MAX3080E ±15kV ESD-Protected, Fail-Safe, High-Speed (10Mbps), Slew-Rate-Limited RS-485/RS-422 Transceivers The MAX3080E–MAX3089E are ±15kV electrostatic discharge (ESD)-protected, high-speed transceivers for RS-485/RS-422 communication that contain one driver and one receiver. These devices feature fail-safe circuitry, which guarantees a logic-high receiver output when the receiver inputs are open or shorted. This means that the receiver output will be a logic high if all…
    • Add to cart
  • MAX3157CAI+ Quick View
  • MAX31826MUA+ Quick View
  • MAX31855KASA+ Quick View
  • MAX31855TASA+ Quick View
  • MAX3221CUE+ Quick View
    • MAX3221CUE+ Quick View

    • MAX3221CUE+

    • €0.51
    • MAX3221 +3V to +5.5V RS-232 Transceivers with AutoShutdown The MAX3221/MAX3223/MAX3243 achieve 1µA supply current with Maxim’s revolutionary AutoShutdown™ feature. When the MAX3221/MAX3223/MAX3243 do not sense a valid signal level on their receiver inputs, the on-board power supply and drivers shut down. This occurs if the RS-232 cable is disconnected or if the transmitters of the connected peripheral are turned off.…
    • Add to cart
  • MAX3223CAP+T Quick View
    • Out of Stock
      MAX3223CAP+T Quick View

    • MAX3223CAP+T

    • €0.56
    • MAX3223 +3V to +5.5V RS-232 Transceivers with AutoShutdown The MAX3221/MAX3223/MAX3243 achieve 1µA supply current with Maxim’s revolutionary AutoShutdown™ feature. When the MAX3221/MAX3223/MAX3243 do not sense a valid signal level on their receiver inputs, the on-board power supply and drivers shut down. This occurs if the RS-232 cable is disconnected or if the transmitters of the connected peripheral are turned off.…
    • Read more