RabbitCore RCM3700 Embedded Module Rabbit 3000 22.1MHz 512KB 512KB (Internal), 1MB (External) This module is now EOL; FMG has stock on backorder with DIGI. If you can wait a lead-time of 18-20 weeks for delivery, please place your back order.. If required, please contact sales@fmgelectronics.ie more information. Price and Quantity Quantity 1 - 24 = €86.83 Quantity 25 - 99…
Contact FMG for a quote https://mwave-ltd.com/wp-content/uploads/2023/07/MWave-4-port-Attenuator-2023.pdf The MWave four-port attenuator is ideally suited to testing multi path communications channels (eg G.hn) under a wide range of attenuation levels, allowing different cable loss scenarios to be emulated. With a wide frequency range (1MHz-6GHz) and an attenuation setpoint range of 10-120dB, the unit can be controlled via USB or ethernet and each…
512KB ARM Cortex-M3 128KB FLASH LQFP-64(10x10) Microcontroller Units (MCUs/MPUs/SOCs) ROHS SAMPLES AVAILABLE ON REQUEST FOR EVALUATION PURPOSES. PLEASE USE CONTACT FORM.
32KB ARM-MSeries 4KB FLASH TSSOP-20 Microcontroller Units (MCUs/MPUs/SOCs) ROHS SAMPLES AVAILABLE ON REQUEST FOR EVALUATION PURPOSES. PLEASE USE CONTACT FORM.
IC MCU 32BIT 256KB FLASH 48LQFP ARM® Cortex®-M0+ APM32F030xC Microcontroller IC 32-Bit 48MHz 256KB (256K x 8) FLASH 48-LQFP SAMPLES AVAILABLE ON REQUEST FOR EVALUATION PURPOSES. PLEASE USE CONTACT FORM.
32KB 4KB FLASH 26 ARM Cortex-M0 48MHz LQFP-32(7x7) Microcontroller Units (MCUs/MPUs/SOCs) ROHS SAMPLES AVAILABLE ON REQUEST FOR EVALUATION PURPOSES. PLEASE USE CONTACT FORM.
64KB 8KB FLASH 39 ARM Cortex-M0 48MHz LQFP-48(7x7) Microcontroller Units (MCUs/MPUs/SOCs) ROHS SAMPLES AVAILABLE ON REQUEST FOR EVALUATION PURPOSES. PLEASE USE CONTACT FORM.
64KB 8KB FLASH 39 ARM Cortex-M0 48MHz LQFP-48(7x7) Microcontroller Units (MCUs/MPUs/SOCs) ROHS SAMPLES AVAILABLE ON REQUEST FOR EVALUATION PURPOSES. PLEASE USE CONTACT FORM.
64KB 8KB FLASH 25 ARM Cortex-M0 48MHz LQFP-32(7x7) Microcontroller Units (MCUs/MPUs/SOCs) ROHS SAMPLES AVAILABLE ON REQUEST FOR EVALUATION PURPOSES. PLEASE USE CONTACT FORM.
64KB 8KB FLASH 55 ARM Cortex-M0 48MHz LQFP-64(10x10) Microcontroller Units (MCUs/MPUs/SOCs) ROHS SAMPLES AVAILABLE ON REQUEST FOR EVALUATION PURPOSES. PLEASE USE CONTACT FORM.
64KB 20KB FLASH 37 ARM Cortex-M3 72MHz LQFP-48(7x7) Microcontroller Units (MCUs/MPUs/SOCs) ROHS SAMPLES AVAILABLE ON REQUEST FOR EVALUATION PURPOSES. PLEASE USE CONTACT FORM.
IC MCU 32BIT 128KB FLASH 48LQFP ARM® Cortex®-M3 APM32F103xB Microcontroller IC 32-Bit 96MHz 128KB (128K x 8) FLASH 48-LQFP SAMPLES AVAILABLE ON REQUEST FOR EVALUATION PURPOSES. PLEASE USE CONTACT FORM.
APM32F072RBT7 Geehy ARM Microcontroller IC 32-Bit 48MHz 128KB(128Kx 8) Flash 64-LQFP RoHS SAMPLES AVAILABLE ON REQUEST FOR EVALUATION PURPOSES. PLEASE USE CONTACT FORM.
256KB 64KB FLASH 51 ARM Cortex-M3 96MHz LQFP-64(10x10) Microcontroller Units (MCUs/MPUs/SOCs) ROHS SAMPLES AVAILABLE ON REQUEST FOR EVALUATION PURPOSES. PLEASE USE CONTACT FORM.
The APM32F103RCT7 automotive-grade MCUs based on Arm® Cortex®-M3 core with integrated 256KB Flash, 64KB SRAM, and abundant storage to meet the demand of large-capacity cache for automotive applications. It provides "dual CAN" communication interface and complies with 2.0A and 2.0 specification, communication rates up to 1Mbit/s. It supports independent USB and CAN, which is suitable for a wide range of car terminals and helps…
32KB 20KB FLASH 26 ARM Cortex-M3 72MHz QFN-36 Microcontroller Units (MCUs/MPUs/SOCs) ROHS SAMPLES AVAILABLE ON REQUEST FOR EVALUATION PURPOSES. PLEASE USE CONTACT FORM.
APM32F103x4x6x8xB Series MCU is based on 32-bit Arm® Cortex®-M3 core, has strong computing efficiency and excellent power efficiency. It is equipped with enhanced external memory controller eMMC to support external expansion of SDRAM. It has enhanced peripheral function to support the simultaneous use of USB and can interfaces. The built-in FPU can effectively improve the speed of single-precision floating-point operation.…
256KB 64KB FLASH 80 ARM Cortex-M3 96MHz LQFP-100(14x14) Microcontroller Units (MCUs/MPUs/SOCs) ROHS SAMPLES AVAILABLE ON REQUEST FOR EVALUATION PURPOSES. PLEASE USE CONTACT FORM.
512KB 128KB FLASH 112 ARM Cortex-M3 96MHz LQFP-144(20x20) Microcontroller Units (MCUs/MPUs/SOCs) ROHS SAMPLES AVAILABLE ON REQUEST FOR EVALUATION PURPOSES. PLEASE USE CONTACT FORM.
the industrial-grade APM32F105/F107 connectivity MCU is based on Arm® Cortex®-M3 cores, operating at 96MHz with powerful and stable computing performance. With built-in 256KB Flash and 64KB SRAM, it supports U(S)RAT, SPI, I2S, I2C, and other communication peripherals, providing a dual CAN bus and USB OTG_FS interface. Meanwhile, the F107 series provides an Ethernet MAC controller, which is compatible with the IEEE-802.3-2002…
IC MCU 32BIT 256KB FLASH 100LQFP ARM® Cortex®-M3 APM32F107xC Microcontroller IC 32-Bit 96MHz 256KB (256K x 8) FLASH 100-LQFP (14x14) SAMPLES AVAILABLE ON REQUEST FOR EVALUATION PURPOSES. PLEASE USE CONTACT FORM.
Based on Arm® Cortex®-M4F core, the APM32F405/407 series supports single-precision FPU, enhanced DSP, and high-speed OTG with on-chip PHY. Its large memory meets the needs of complex programs and extensive resource peripherals to fully enhance the product’s diverse control and extensive connectivity. SAMPLES AVAILABLE ON REQUEST FOR EVALUATION PURPOSES. PLEASE USE CONTACT FORM.
Original APM32F407IET6 integrated circuit 30382 30614 2SK3911 30604 30578 NCE60R900K FCP600N60Z FCP190N65F FCP150N65F SAMPLES AVAILABLE ON REQUEST FOR EVALUATION PURPOSES. PLEASE USE CONTACT FORM.
Based on Arm® Cortex®-M4F core, the APM32F405/407 series supports single-precision FPU, enhanced DSP, and high-speed OTG with on-chip PHY. Its large memory meets the needs of complex programs and extensive resource peripherals to fully enhance the product’s diverse control and extensive connectivity. SAMPLES AVAILABLE ON REQUEST FOR EVALUATION PURPOSES. PLEASE USE CONTACT FORM.
APM32F417 series MCU, based on Arm® Cortex®-M4 core, supports single-precision FPU and enhanced DSP instructions. Its rich peripherals meet the needs of multiple applications and high-speed OTG supports on-chip PHY. SM2, SM3, SM4, and other encryption algorithms ensure data security. SAMPLES AVAILABLE ON REQUEST FOR EVALUATION PURPOSES. PLEASE USE CONTACT FORM.
APM32F417 series MCU, based on Arm® Cortex®-M4 core, supports single-precision FPU and enhanced DSP instructions. Its rich peripherals meet the needs of multiple applications and high-speed OTG supports on-chip PHY. SM2, SM3, SM4, and other encryption algorithms ensure data security. SAMPLES AVAILABLE ON REQUEST FOR EVALUATION PURPOSES. PLEASE USE CONTACT FORM.
APM32F417 series MCU, based on Arm® Cortex®-M4 core, supports single-precision FPU and enhanced DSP instructions. Its rich peripherals meet the needs of multiple applications and high-speed OTG supports on-chip PHY. SM2, SM3, SM4, and other encryption algorithms ensure data security. SAMPLES AVAILABLE ON REQUEST FOR EVALUATION PURPOSES. PLEASE USE CONTACT FORM.
BC66-NA is a high-performance, multi-band LTE Cat NB2 module with extremely low power consumption. The ultra-compact 17.7 mm × 15.8 mm × 2.0 mm profile makes it a perfect choice for size sensitive applications. Designed to be compatible with Quectel GSM/GPRS module M66 in the compact and unified form factor, it provides a flexible and scalable platform for migrating from…
Cat NB2 module 17.7 mm × 15.8 mm × 2.2 mm SMT form factor LCC package Max. 126.5 Kbps downlink / 158.5 Kbps uplink Extended temperature range of -40°C to +85°C Contact sales@fmgelectronics.ie for quote and/or more information.
LTE BC95 NB-IoT Module High-performance NB-IoT module with extremely low power consumption. Region and LTE band specific Price Quantity Quantity 1 – 24 = €32.59
BC95-G TE-A to be used with Quectel GSM EVB KIT for rapid prototyping LTE BC95-G NB-IoT Module Test Evaluation Adaptor (TE-A) Price Quantity Quantity 1 – 24 = €32.59
RF TXRX MOD CELL NAV SMD Cellular, Navigation GLONASS, GNSS, GPS, LTE Transceiver Module Antenna Not Included Surface Mount Contact sales@fmgelectronics.ie for quote and/or more information. Price Quantity Quantity 1 – 24 = €18.58
BG95-M3LA-64-SGNS MOQ 250PCS T&R / ORDER MULTIPLE 250PCS T&R BG95 is a series of multi-mode LPWA modules supporting LTE Cat M1/Cat NB2/EGPRS and integrated GNSS.It is 3GPP Rel-14 compliant and offers maximum data rates of 588 kbps downlink and 1119 kbps uplink under LTE Cat M1. It features ultra-low power consumption by leveraging the integrated RAM/flash as well as the…
BG95 is a series of multi-mode LPWA modules supporting LTE Cat M1/Cat NB2/EGPRS and integrated GNSS.It is 3GPP Rel-14 compliant and offers maximum data rates of 588 kbps downlink and 1119 kbps uplink under LTE Cat M1. It features ultra-low power consumption by leveraging the integrated RAM/flash as well as the ARM Cortex A7 processor supporting ThreadX, achieving up to…
LTE BG96 Cat M1/NB1/EGPRS Module MINI PCIe Format LTE Cat M1/Cat NB1/EGPRS module offering a maximum data rate of 375Kbps downlink and 375Kbps uplink. It features global frequency bands, ultra-low power consumption, in MINI PCIe Format Price Quantity Quantity 1 – 24 = €26.20
LTE BG96 Cat M1/NB1/EGPRS Module LTE Cat M1/Cat NB1/EGPRS module offering a maximum data rate of 375Kbps downlink and 375Kbps uplink. It features global frequency bands, ultra-low power consumption. MOQ 250PCS T&R / ORDER MULTIPLE 250PCS T&R Price Quantity Quantity 100 – 499 = €19.13 Quantity 500+ = €18.62
LTE BG96 Cat M1/NB1/EGPRS Module LTE Cat M1/Cat NB1/EGPRS module offering a maximum data rate of 375Kbps downlink and 375Kbps uplink. It features global frequency bands, ultra-low power consumption. MOQ 10PCS STRIP OF TAPE / ORDER MULTIPLE 10PCS STRIP OF TAPE Price Quantity Quantity 1 – 24 = €20.22 Quantity 25 – 99 = €19.66 Quantity 100 – 499 =…
Mobile Modules CAT M1/CAT NB1 Cellular EDGE, GPRS, GSM, HSPA, LTE, UMTS Transceiver Module 850MHz, 900MHz, 1.8GHz, 1.9GHz Antenna Not Included Surface Mount Contact sales@fmgelectronics.ie for quote and/or more information.
Product Line - HPA Subdivided Product Line - Voltage reference Package - S High accuracy Voltage reference Contact FMG for a quote or samples for evaluations
Product Line - HPA Subdivided Product Line - Voltage reference Package - S High accuracy Voltage reference Contact FMG for a quote or samples for evaluations
Product Line - HPA Subdivided Product Line -Voltage reference Package - S High accuracy Voltage reference Contact FMG for a quote or samples for evaluations
3V to 5.5V RS-485 Half-Duplex Transceiver with ±30kV ESD, +65V Bus Fault Protection, and ±40V Common-Mode Range 3.0V to 5.5V Half-Duplex RS485 Transceivers w ±65V Fault Protection and ±40V Common-Mode Range Samples available for evaluation contact FMG
Product Line - Isolation Subdivided Product Line - Digital isolation Package - A Isolator with Isolated Power Contact FMG for a quote or samples for evaluations
Chipanalog - Half-Duplex 0.5 3.3/5.0 SOIC16-WB(W) / CA-IS309x 5kVRMS Isolated RS-485/RS-422 Transceivers with Integrated DC-DC Converter SOIC-16-300mil Isolated RS-485/422 Transceivers with power ROHS For strip of tape - 100pcs MOQ / 100pcs order multiple strip of tape For T&R - 1,000PCS MOQ / ORDER MULTIPLE 1,000PCS T&R CONTACT SALES AT FMG ELECTRONICS FOR THIS QUANTITY Price Quantity Quantity 100 -…
Isolated RS-485 transceiver with integrated DC-DC converter Half-Duplex 10 3.3/5.0 SOIC16-WB(W) / CA-IS309x 5kVRMS Isolated RS-485/RS-422 Transceivers with Integrated DC-DC Converter Contact FMG for a quote or samples for evaluations
Product Line - Isolation Subdivided Product Line - Isolated drive Package - K Half-bridge Isolated drive Contact FMG for a quote or samples for evaluations
Product Line - Isolation Subdivided Product Line - Digital isolation Package - W Isolator with Isolated Power Contact FMG for a quote or samples for evaluations
Standard Digital Isolator For strip of tape - 100pcs MOQ / 100pcs order multiple strip of tape For T&R - 2,500PCS MOQ / ORDER MULTIPLE 2,500PCS T&R CONTACT SALES AT FMG ELECTRONICS FOR THIS QUANTITY Price Quantity Quantity 100 - 499 = €0.82 Quantity 500 - 999 = €0.80 Quantity 1000 + = €0.78
The kit includes: Digi ConnectCore® MP157 development board with SOM Console port cable Dual-band wireless antenna Power supply and accessories Reference designs and online documentation Features and benefits: Industrial-grade, scalable, embedded SOM platform Pre-certified dual-band Wi-Fi 5 (802.11ac) and Bluetooth® 5.0 3D GPU, rich display and camera capabilities Power management with hardware and software support Digi SMTplus form factor (29…
CONNECTCORE 8X DEVELOPMENT KIT Development Boards & Kits - ARM ConnectCore 8X Dev Kit Pro, QuadX, 16GB eMMC, 2GB, Based on the NXP i.MX 8X Price Quantity Quantity 1 - 24 = €477.50
Digi ConnectCore MP157 dual 650 MHz, M4, GPU, 512 MB DDR3L, 512 MB SLC NAND flash, secure boot, MCA, -40 to 85° C (-40 to 185° F), Wi-Fi 5, Bluetooth 5.0 Common Digi SMTplus® surface mount footprint using 76-pad edge castellated pads (1.27 mm pitch) or 245-pad LGA (1.27 mm pitch) option Intelligent, wireless and secure embedded system-on-module based on…
LOW POWER 4M SRAM 512K BY 8 High Speed Super Low Power SRAM 512K Word By 8 Bit CS18LV40963 1 Rev. 2.3 Chiplus reserves the right to change product or specification without notice. Price Quantity Quantity 1 – 24 = €10.00
Half-Duplex / Data Rate(Mbps) 20 / Number of Nodes on Bus 256 / Package DFN8(D) / 3.0V to 5.5V RS485/RS422 Transceivers with ±20kV ESD Protection Contact FMG for a quote or samples for evaluations
Half-Duplex Data Rate(Mbps) 20 / Number of Nodes on Bus 256 / Package 256 MSOP8(M) / 3.0V to 5.5V RS485/RS422 Transceivers with ±20kV ESD Protection Contact FMG for a quote or samples for evaluations
Half-Duplex Data Rate(Mbps) 20 / Number of Nodes on Bus 256 / Package 256 SOIC8(S) / 3.0V to 5.5V RS485/RS422 Transceivers with ±20kV ESD Protection Contact FMG for a quote or samples for evaluations
IC RTC CLK/CALENDAR PAR 28-EDIP Real Time Clock (RTC) IC Clock/Calendar 32KB Parallel 28-DIP Module (0.600", 15.24mm) Price Quantity Quantity 1 – 24 = €22.78
DS1813 - 5V EconoReset with Pushbutton DS1813 (5V) and DS1818 (3.3V) EconoResets are simple three-pin voltage monitors and power-on resets that hold reset for 150ms for stabilization after power returns to tolerance. The voltage monitor uses precision temperature reference and comparator circuits that detect out-of-tolerance conditions and generate an active low reset. 100PCS MOQ STRIP OF TAPE / ORDER MULTIPLE…
€0.75Original price was: €0.75.€0.00Current price is: €0.00.
DS1816 - 3.3V EconoReset with Open Drain Output DS1811 (5V) and DS1816 (3.3V) EconoResets are simple three-pin voltage monitors and power-on resets that hold reset for 150ms for stabilization after power returns to tolerance. The voltage monitor uses precision temperature reference and comparator circuits that detect out-of-tolerance conditions and generate an active low reset. 50PCS MOQ STRIP OF TAPE /…
DS1816 - 3.3V EconoReset with Open Drain Output DS1811 (5V) and DS1816 (3.3V) EconoResets are simple three-pin voltage monitors and power-on resets that hold reset for 150ms for stabilization after power returns to tolerance. The voltage monitor uses precision temperature reference and comparator circuits that detect out-of-tolerance conditions and generate an active low reset. 100PCS MOQ STRIP OF TAPE /…
EEPROM Serial-I2C 1K-bit 4Pages x 256 1.8V/2.5V/3.3V/5V 8-Pin uMAX 1Kb I2C/SMBus EEPROM with SHA-1 Engine EEPROM, 1KB, I2C/SMBUS, 8UMAX; Memory Size:1Kbit; Memory Configuration:4Pages x 32Bytes; Clock Frequency:400kHz; Supply Voltage Min:1.62V; Supply Voltage Max:5.5V; Memory Case Style:MSOP; No. of Pins:8; Interface Type:I2C, SMBus; Operating Temperature Min:-40°C; Operating Temperature Max:85°C; Operating Temperature Range:-40°C to +85°C; Supply Voltage Range:1.62V to 5.5V Price Quantity…
DS31256 - 256-Channel, High-Throughput HDLC Controller The DS31256 is a 256-channel HDLC controller that can handle up to 60 T1 or 64 E1 data streams or two T3 data streams. Each of the 16 physical ports can handle one, two, or four T1 or E1 data streams. 20PCS MOQ / ORDER MULTIPLE 20PCS PACK SIZE Price Quantity Quantity 1 –…
DS600 - ±0.5°C Accurate Analog-Output Temperature Sensor The DS600 is a ±0.5°C accurate analog-output temperature sensor. This accuracy is valid over its entire operating voltage range of 2.7V to 5.5V and the wide temperature range of -20°C to +100°C. The DS600 can also act as a thermostat, with user-programmable trip points. A shutdown mode enables the DS600 to be placed…
DS89C450 - Ultra-High-Speed Flash Microcontrollers The DS89C430 and DS89C450 offer the highest performance available in 8051-compatible microcontrollers. They feature newly designed processor cores that execute instructions up to 12 times faster than the original 8051 at the same crystal speed. Typical applications will experience a speed improvement up to 10x. At 1 million instructions per second (MIPS) per megahertz, the…
LTE EC25-E Category4 module (Europe) Test Evaluation Adaptor LTE Cat 4 module it delivers 150Mbps downlink and 50Mbps uplink data rates. Europe. TE-A for use with UMTS<E EVB kit for rapid prototyping & Evaluation Price Quantity Quantity 1 – 24 = €54.42
Linear IC Transceiver Module Mobile Modules 1Gbit ROM+1Gbit RAM, Cost down version of EG21-G, VoLTE, BT Contact sales@fmgelectronics.ie for quote and/or more information.
LTE Cat 4 module 51.0mm x 30.0mm x 4.9mm 9.8g Standard PCI Express® Mini Card form factor (Mini PCIe) Max. 150Mbps downlink / 50Mbps uplink under LTE Extended temperature range of -40°C to +80°C EG25-GL mPCIe ROHS Cost down version EG25GLGA-MINIPCIE Price Quantity Quantity 1 – 24 = €52.90
EG912NENAA-N06-MN0AA LTE 450 Cat. 1 module Mini PCIe Dimensions: 51.0 × 30.0 × 4.9 mm Weight: 8.5g Max. data rates of 10Mbps DL / 5Mbps UL Extended temperature range of -40°C to +85°C Price Quantity Quantity 1 – 24 = €22.65
Mobile Modules LTE Cat 1, 4M, LTE only, No GNSS, No Quecopen, No VoLTE Cellular LTE CAT-1 (AT&T/T-Mobile), TCP, UDP Transceiver Module Antenna Not Included Surface Mount Contact sales@fmgelectronics.ie for quote and/or more information.
Cellular GPRS, HSPA+, LTE, UMTS, WCDMA Transceiver Module Antenna Not Included Surface Mount Contact sales@fmgelectronics.ie for quote and/or more information.
Current Sensor Development Tools Evalaution board with MCA1101-5-3 installed for testing Current sensor based on MEMS technology with integrated Rsense and 4.8kv isolation al l in 16 pin SOIC package. Ev kits are available
Bluetooth, WiFi 802.11b/g/n/ax, Bluetooth v5.1 Transceiver Module 2.4GHz PCB Trace Surface Mount Multiprotocol Modules Wi-Fi 6, single band 2.4GHz, BLE 5.1, Antenna: PCB, -40-85C, 4MB flash Contact sales@fmgelectronics.ie for quote and/or more information.
Linear IC Transceiver Module Wi-Fi HaLow module LGA form factor 13.0 mm × 13.0 mm × 2.2 mm 0.72 g Max. data rate of 32.5 Mbps Operating temperature of -30°C to +85°C Contact FMG for more Information or a Quote
802.15.4, Bluetooth, WiFi 802.11ax, Bluetooth v5.2, Zigbee® Transceiver Module 2.4GHz, 5GHz Antenna Not Included Surface Mount Contact sales@fmgelectronics.ie for quote and/or more information.
Bluetooth, WiFi 802.11ax, Bluetooth v5.2 Transceiver Module 2.4GHz, 5GHz Antenna Not Included Surface Mount Contact sales@fmgelectronics.ie for quote and/or more information.
Flexpoint laser diode module, 520nm green, 1mW FLEXPOINT® dot laser modules are available with either circular or elliptical output beam. Due to sophisticated electronics, a wide range of laser diodes in terms of wavelength and output power levels can be used. In addition, the options found below in the table are also available for order and make the FLEXPOINT® laser…
Flexpoint laser diode module, 635nm red, 1mW FLEXPOINT® dot laser modules are available with either circular or elliptical output beam. Due to sophisticated electronics, a wide range of laser diodes in terms of wavelength and output power levels can be used. In addition, the options found below in the table are also available for order and make the FLEXPOINT® laser…
GSM/NB-IoT EVB Kit GSM EVB for designers to develop applications based on Quectel GSM, UMTS and NB-IoT modules. This EVB can test basic functionalities of these modules. Price Quantity Quantity 1 – 24 = €40.81
Transceiver Module Bluetooth Modules - 802.15.1 BT 5.4 & BLE Mesh, 20 dBm max TX power, ARM Cortex-M33 core, 80MHz, -40 C to +105 C, PCB antenna Contact sales@fmgelectronics.ie for quote and/or more information.
Quectel Wireless Solutions BT 5.4 & BLE Mesh, 20 dBm max TX power, ARM Cortex-M33 core, 80MHz, -40 C to +105 C, PCB antenna Contact sales@fmgelectronics.ie for quote and/or more information.
Bluetooth Bluetooth v5.4 Transceiver Module PCB Trace Surface Mount Bluetooth Modules - 802.15.1 BLE 5.4 standalone module, 32 KB RAM, 512 KB flash, transmit power = 6 dBm, -40 C to +85 C, PCB antenna Contact sales@fmgelectronics.ie for quote and/or more information.
High-performance standalone LoRa module LGA form factor 12mm × 12mm × 1.8mm 0.56g Operating temperature of -40℃ to +85℃ RF Modules LoraWan module (470-510MHz) for Chinese Market Contact : technical@fmgelectronics.ie
RF Development Tools KG200Z Evaluation KIT, Includes Antenna and Power Cable KG200ZABMD - Transceiver; LoRa® (LoRaWAN®) 862MHz ~ 928MHz Evaluation Board Contact sales@fmgelectronics.ie for quote and/or more information.
GNSS L26 EVB KIT Evaluation Kit for L26. Concurrent receiver module integrated with multiple systems. It provides simultaneous GPS, GLONASS, Galileo and QZSS open service L1 reception capability. With 33 tracking channels, 99 acquisition channels and 210 PRN channels, L26 can acquire and track any mix of multiple satellite signals. Price Quantity Quantity 1 – 24 = €54.42
GPS L70 EVB KIT Evaluation Kit for L70. SMD type module, brings the high performance of MTK positioning engine to the industrial applications with compact profile, ultra low power consumption and fast positioning capability. Combining advanced AGPS called EASY™ (Embedded Assist System) and proven AlwaysLocate™ technology. Price Quantity Quantity 1 – 24 = €54.42
GNSS L76 module Compact GNSS module, is a concurrent GNSS receiver with multiple GNSS systems. It provides simultaneous GPS, GLONASS, BeiDou, Galileo and QZSS open service L1 reception capability. With 33 tracking channels, 99 acquisition channels, and 210 PRN channels, L76 can acquire and track any mix of multiple satellite signals. MOQ 5PCS / ORDER MULTIPLE 5PCS Price Quantity Quantity…
GNSS L76 EVB KIT Evaluation Kit for L76. compact GNSS module, is a concurrent GNSS receiver with multiple GNSS systems. It provides simultaneous GPS, GLONASS, BeiDou, Galileo and QZSS open service L1 reception capability. With 33 tracking channels, 99 acquisition channels, and 210 PRN channels, L76 can acquire and track any mix of multiple satellite signals. Price Quantity Quantity 1…
GNSS L76-L module Concurrent receiver module integrating GPS, GLONASS, Galileo and QZSS systems. With 33 tracking channels, 99 acquisition channels and 210 PRN channels, L76-L can acquire and track any mix of GPS, GLONASS and SBAS signals. Designed to be compatible with Quectel L76 module in the compact and unified form factor, L76-L provides a built-in LNA for better performance…
GNSS L86 EVB KIT Evaluation Kit for L86. Ultra-compact GNSS POT (Patch on Top) module with an embedded 18.4mm × 18.4mm × 4.0mm patch antenna and utilizes the MediaTek new generation GNSS chipset MT3333 that achieves the perfect performance. Price Quantity Quantity 1 – 24 = €65.18
GNSS L96 Evaluation kit for L96. Concurrent multi-GNSS receiver module with embedded chip antenna. With 33 tracking channels, 99 acquisition channels and 210 PRN channels, L96 supports concurrent reception of up to three GNSS systems (GPS+GLONASS+Galileo). Price Quantity Quantity 1 – 24 = €65.18
Low cost laser diode module, 635nm, 1mW, ø8mm Features APC (auto power control) IC inside Low current consumption of the APC circuit Surge current protection High quality lens for output beam Price Quantity Quantity 1 – 24 = €31.59
Low cost laser diode module, 650nm, 1mW, ø6.5 x 8.5mm Features APC (auto power control) IC inside Low current consumption of the APC circuit Much smaller LD module Surge current protection High quality lens for output beam Price Quantity Quantity 1 – 24 = €12.30
Low cost laser diode module, 650nm, 1mW, ø3.3 x 7.0mm Features APC (auto power control) IC inside Low current consumption of the APC circuit Much smaller LD module Surge current protection High quality lens for output beam Price Quantity Quantity 1 – 24 = €13.72
Low cost laser diode module, 780nm, 1mW Features APC (auto power control) IC inside Low current consumption of the APC circuit Surge current protection High quality lens for output beam Price Quantity Quantity 1 – 24 = €19.16
Low cost laser diode module, 850nm, 1mW, ø4mm Features APC (auto power control) IC inside Low current consumption of the APC circuit Surge current protection High quality lens for output beam Price Quantity Quantity 1 – 24 = €54.43
Miniaturized Step-Up Power Supply in Package 100 mA Synchronous Boost Converter Boost Switching Regulator IC Positive Adjustable 1.4V 1 Output 100mA 6-WFDFN Exposed Pad Contact FMG for more information
GSM/GPRS M95 Test Evaluation Adaptor (TE-A) Test Evaluation adaptor for use with GSM EVB kit for rtest and evaluation. Highly compact Quad-band GSM/GPRS module in LCC castellation packaging in the market. It adopts the latest MTK chipset and features compact size of 19.9mm × 23.6mm × 2.65mm, ultra low power consumption and extended temperature range. Price Quantity Quantity 1 –…
MAX1037 - 2.7V to 5.5V, Low-Power, 4-/12-Channel 2-Wire Serial 8-Bit ADCs The MAX1036–MAX1039 low-power, 8-bit, multichannel, analog-to-digital converters (ADCs) feature internal track/hold (T/H), voltage reference, clock, and an I²C-compatible 2-wire serial interface. These devices operate from a single supply and require only 350µA at the maximum sampling rate of 188ksps. AutoShutdown™ powers down the devices between conversions reducing supply current…
MAX11300 - PIXI, 20-Port Programmable Mixed-Signal I/O with 12-Bit ADC, 12-Bit DAC, Analog Switches, and GPIO The MAX11300 integrates a PIXI™, 12-bit, multichannel, analog-to-digital converter (ADC) and a 12-bit, multichannel, buffered digital-to-analog converter (DAC) in a single integrated circuit (IC). This device offers 20 mixed-signal high-voltage, bipolar ports, which are configurable as an ADC analog input, a DAC analog output,…
MAX13014 - +1.2V to +3.6V, 0.1µA, 100Mbps, Single-/Dual-/Quad-Level Translators The MAX13013/MAX13014/MAX3023 single-/dual-/quad-level translators provide the level shifting necessary to allow 100Mbps data transfer in a multivoltage system. Externally applied voltages, VCC and VL, set the logic levels on either side of the device. Logic signals present on the VL side of the device appear as a higher voltage logic signal…
MAX13430E - RS-485 Transceivers with Low-Voltage Logic Interface The MAX13430E–MAX13433E are full- and half-duplex RS-485 transceivers that feature an adjustable low-voltage logic interface for operation in multivoltage systems. This allows direct interfacing to low-voltage ASIC/FPGAs without extra components. The MAX13430E–MAX13433E RS-485 transceivers operate with a VCC voltage supply from +3V to +5V. The low-voltage logic interface operates with a voltage…
MAX14787E - Full-Duplex, ±35kV ESD-Protected, RS-485 Transceivers for High-Speed Communication The MAX14784E/MAX14786E/MAX14787E/MAX14789E full-duplex RS-485 transceivers are designed for robust communication in harsh industrial environments. All devices feature ±35kV ESD protection on the RS-485 pins and operate from a 3V to 5.5V supply with a 4mA no-load supply current (max). Price Quantity Quantity 1 – 24 = €1.44 Quantity 25 –…
MAX148 - +2.7V to +5.25V Low-Power 8-Channel Serial 10-Bit ADCs The MAX148/MAX149 10-bit data-acquisition systems combine an 8-channel multiplexer, high-bandwidth track/hold, and serial interface with high conversion speed and low power consumption. They operate from a single +2.7V to +5.25V supply, and sample to 133ksps. Both devices’ analog inputs are software configurable for unipolar/bipolar and single-ended/differential operation. 100PCS MOQ /…
MAX14978 - SuperSpeed USB Passive Switch (Low/Full/Hi/SuperSpeed) The MAX14978 high-performance, passive analog switch is ideal for switching Hi-Speed USB and SuperSpeed USB data between one source and two loads, or vice versa. The device can be used in desktop and notebook applications where SuperSpeed USB ports are in limited supply. The device consists of two sets of analog switches with…
MAX1508 - Linear Li+ Battery Charger with Integrated Pass FET, Thermal Regulation, and ACOK Flag in 3mm x 3mm TDFN The MAX1508 is an intelligent, stand-alone constant-current, constant-voltage (CCCV), thermally regulated linear charger for a single-cell lithium-ion (Li+) battery. The MAX1508 integrates the current-sense circuit, MOS pass element, and thermal-regulation circuitry, and also eliminates the reverse-blocking Schottky diode, to create…
MAX1522 - Simple SOT23 Boost Controllers The MAX1522/MAX1523/MAX1524 are simple, compact boost controllers designed for a wide range of DC-DC conversion topologies, including step-up, SEPIC, and flyback applications. They are for applications where extremely low cost and small size are top priorities. These devices are designed specifically to provide a simple application circuit and minimize the size and number of…
MAX1524 - Simple SOT23 Boost Controllers The MAX1522/MAX1523/MAX1524 are simple, compact boost controllers designed for a wide range of DC-DC conversion topologies, including step-up, SEPIC, and flyback applications. They are for applications where extremely low cost and small size are top priorities. These devices are designed specifically to provide a simple application circuit and minimize the size and number of…
MAX1555 - SOT23, Dual-Input, USB/AC Adapter, 1-Cell Li+ Battery Chargers The MAX1551 and MAX1555 charge a single-cell lithium-ion (Li+) battery from both USB and AC adapter sources. They operate with no external FETs or diodes, and accept operating input voltages up to 7V. 100PCS MOQ / ORDER MULTIPLE 100PCS STRIP OF TAPE Price Quantity Quantity 100 – 499 = €1.42…
MAX1561 - High-Efficiency, 26V Step-Up Converters for Two to Six White LEDs The MAX1561/MAX1599 step-up converters drive up to six white LEDs with a constant current to provide backlight in cell phones, PDAs, and other hand-held devices. The step-up converter topology allows series connection of the white LEDs so the LED currents are identical for uniform brightness. This configuration eliminates…
MAX1576 - 480mA White LED 1x/1.5x/2x Charge Pump for Backlighting and Camera Flash The MAX1576 charge pump drives up to 8 white LEDs with regulated constant current for uniform intensity. The main group of LEDs (LED1-LED4) can be driven up to 30mA per LED for backlighting. The flash group of LEDs (LED5-LED8) are independently controlled and can be driven up…
MAX16062 - 1% Accurate, Quad-/Hex-/Octal-Voltage µP Supervisors The MAX16060/MAX16061/MAX16062 are 1% accurate, quad-/hex-/octal-voltage µP supervisors in a small thin QFN package. These devices provide supervisory functions for complex multivoltage systems. The MAX16060 monitors four voltages, the MAX16061 monitors six voltages, and the MAX16062 monitors eight voltages. Price Quantity Quantity 1 – 24 = €7.87 Quantity 25 – 99 = €7.31…
MAX16814 - Integrated, 4-Channel, High-Brightness LED Driver with High-Voltage DC-DC Controller The MAX16814 high-efficiency, high-brightness LED (HB LED) driver provides up to four integrated LED current-sink channels. An integrated current-mode switching DC-DC controller drives a DC-DC converter that provides the necessary voltage to multiple strings of HB LEDs. The MAX16814 accepts a wide 4.75V to 40V input voltage range and…
MAX16819 - 2MHz High-Brightness LED Drivers with High-Side Current Sense and 5000:1 Dimming The MAX16819/MAX16820, step-down constant-current high-brightness LED (HB LED) drivers provide a cost-effective solution for architectural and ambient lighting, LED bulbs such as MR16 and other LED illumination applications. Price Quantity Quantity 1 – 24 = €1.44
MAX16820 - 2MHz High-Brightness LED Drivers with High-Side Current Sense and 5000:1 Dimming The MAX16819/MAX16820, step-down constant-current high-brightness LED (HB LED) drivers provide a cost-effective solution for architectural and ambient lighting, LED bulbs such as MR16 and other LED illumination applications. Price Quantity Quantity 1 – 24 = €1.44
250PCS MOQ / ORDER MULTIPLE 250PCS STRIP OF TAPE MAX17222 400mV to 5.5V Input, nanoPower Synchronous Boost Converter with True Shutdown The MAX17220–MAX17225 is a family of ultra-low quiescent current boost (step-up) DC-DC converters with a 225mA/0.5A/1A peak inductor current limit and True Shutdown™. True Shutdown disconnects the output from the input with no forward or reverse current. The output…
MAX1735 200mA, Negative-Output, Low-Dropout Linear Regulator in SOT23 The MAX1735 negative-output, low-dropout linear regulator operates from a -2.5V to -6.5V input and delivers a guaranteed 200mA with a low 80mV dropout. The high-accuracy (±1%) output voltage is preset or can be adjusted from -1.25V to -5.5V with an external resistive voltage-divider. 100PCS MOQ / ORDER MULTIPLE 100PCS STRIP OF TAPE…
MAX1737 Stand-Alone Switch-Mode Lithium-Ion Battery-Charger Controller The MAX1737 is a switch-mode lithium-ion (Li+) battery charger that charges one to four cells. It provides a regulated charging current and a regulated voltage with only a ±0.8% total voltage error at the battery terminals. The external N-channel switch and synchronous rectifier provide high efficiency over a wide input voltage range. A built-in…
MAX17501 60V, 500mA, Ultra-Small, High-Efficiency, Synchronous Step-Down DC-DC Converter The MAX17501 high-efficiency, high-voltage, synchronous step-down DC-DC converter with integrated MOSFETs operates over a 4.5V to 60V input voltage range. This device is offered in a fixed 3.3V , 5V or adjustable output voltage (0.9V to 92%VIN) while delivering up to 500mA of current. The output voltage is accurate to within…
MAX17502 60V, 1A, Ultra-Small, High-Efficiency, Synchronous Step-Down DC-DC Converter The MAX17502 high-efficiency, high-voltage, synchronous step-down DC-DC converter with integrated MOSFETs operates over a 4.5V to 60V input voltage range. This device is offered in a fixed 3.3V, 5V, or adjustable output voltage (0.9V to 92%VIN) while delivering up to 1A of current. The output voltage is accurate to within ±1.7%…
MAX17505 4.5V-60V, 1.7A, High-Efficiency, Synchronous Step-Down DC-DC Converter with Internal Compensation The MAX17505/MAX17505S high-efficiency, high-voltage, synchronously rectified step-down converter with dual integrated MOSFETs operates over a 4.5V to 60V input. It delivers up to 1.7A and 0.9V to 90%VIN output voltage. Built-in compensation across the output voltage range eliminates the need for external components. The feedback (FB) regulation accuracy over…
MAX1763 1.5A, Low-Noise, 1MHz, Step-Up DC-DC Converter The MAX1763 is a high-efficiency, low-noise, step-up DC-DC converter intended for use in battery-powered wireless applications. This device maintains exceptionally low quiescent supply current (110µA) despite its high 1MHz operating frequency. Small external components and a tiny package make this device an excellent choice for small hand-held applications that require the longest possible…
MAX1775 Dual-Output Step-Down DC-DC Converter for PDA/Palmtop Computers The MAX1775 dual, step-down DC-DC converter generates both the main (+3.3V at over 2A) and core (+1.8V at up to 1.5A) supplies for a complete power solution for PDAs, subnotebooks, and other hand-held devices. The main output is adjustable from +1.25V to +5.5V. The core output is adjustable from 1V to 5V.…
MAX1910 1.5x/2x High-Efficiency White LED Charge Pumps The MAX1910/MAX1912 power LEDs with a regulated output voltage or current (up to 120mA) from an unregulated input supply (2.7V to 5.3V). These are complete DC-DC converters requiring only four small ceramic capacitors and no inductors. Input ripple is minimized by a unique regulation scheme that maintains a fixed 750kHz switching frequency over…
MAX1968 Power Drivers for Peltier TEC Modules The MAX1968/MAX1969 are highly integrated and cost-effective, high-efficiency, switch-mode drivers for Peltier thermoelectric cooler (TEC) modules. Both devices utilize direct current control to eliminate current surges in the TEC. On-chip FETs minimize external components while providing high efficiency. A 500kHz/1MHz switching frequency and a unique ripple cancellation scheme reduce component size and noise.…
MAX1979 Integrated Temperature Controllers for Peltier Modules The MAX1978/MAX1979 are the smallest, safest, most accurate complete single-chip temperature controllers for Peltier thermoelectric cooler (TEC) modules. On-chip power FETs and thermal control-loop circuitry minimize external components while maintaining high efficiency. Selectable 500kHz/1MHz switching frequency and a unique ripple-cancellation scheme optimize component size and efficiency while reducing noise. Switching speeds of internal…
MAX202 +5V, RS-232 Transceivers with 0.1µF External Capacitors MAX202 +5V, RS-232 Transceivers with 0.1µF External CapacitorsMAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. The drivers maintain the ±5V EIA/TIA-232E output signal levels at data rates in excess of 120kbps when loaded in accordance with the EIA/TIA-232E…
MAX2361 -Complete Dual-Band Quadrature Transmitters The MAX2361 dual-band, triple-mode complete transmitter for cellular phones represents an integrated and architecturally advanced solution for this application. The device takes a differential I/Q baseband input and converts it up to IF through a quadrature modulator and IF variable-gain amplifier (VGA). The signal is then routed to an external bandpass filter and upconverted to…
MAX241 +5V-Powered, Multichannel RS-232 Drivers/Receivers The MAX220–MAX249 family of line drivers/receivers is intended for all EIA/TIA-232E and V.28/V.24 communications interfaces, particularly applications where ±12V is not available.The MAX225, MAX233, MAX235, and MAX245/MAX246/MAX247 use no external components and are recommended for applications where printed circuit board space is critical. 46 MOQ / 46 ORDER MULTIPLE TUBES Price Quantity Quantity 1 –…
MAX2530 - Quadruple-Mode PCS/Cellular/GPS LNA/Mixers The MAX2351/MAX2354/MAX2358/MAX2359/MAX2530/MAX2531/MAX2537/MAX2538/MAX2539 family of multiband LNA/Mixer ICs is optimized for CDMA, GSM, and TDMA applications in both cellular and PCS bands. In addition, the MAX2530/MAX2531/ MAX2537/MAX2538/MAX2539 ICs feature a GPS LNA/mixer signal path for E911 and Traveler Assistance applications. The cellular and PCS signals can be routed to either IF port. For example, one IF…
MAX2538 - Quadruple-Mode PCS/Cellular/GPS LNA/Mixers The MAX2351/MAX2354/MAX2358/MAX2359/MAX2530/MAX2531/MAX2537/MAX2538/MAX2539 family of multiband LNA/Mixer ICs is optimized for CDMA, GSM, and TDMA applications in both cellular and PCS bands. In addition, the MAX2530/MAX2531/ MAX2537/MAX2538/MAX2539 ICs feature a GPS LNA/mixer signal path for E911 and Traveler Assistance applications. The cellular and PCS signals can be routed to either IF port. For example, one IF…
MAX2608 45MHz to 650MHz, Integrated IF VCOs with Differential Output The MAX2605-MAX2609 are compact, high-performance intermediate-frequency (IF) voltage-controlled oscillators (VCOs) designed specifically for demanding portable wireless communication systems. They combine monolithic construction with low-noise, low-power operation in a tiny 6-pin SOT23 package 200PCS MOQ STRIP OF TAPE / ORDER MULTIPLE 200PCS STRIP OF TAPE Price Quantity Quantity 100 – 499…
MAX2620 10MHz to 1050MHz Integrated RF Oscillator with Buffered Outputs The MAX2620 combines a low-noise oscillator with two output buffers in a low-cost, plastic surface-mount, ultra-small µMAX® package. This device integrates functions typically achieved with discrete components. The oscillator exhibits low-phase noise when properly mated with an external varactor-tuned resonant tank circuit. Two buffered outputs are provided for driving mixers…
MAX2683 - 3.5GHz Downconverter Mixers with Selectable LO Doubler The MAX2683/MAX2684 are super-high-performance, low-cost downconverter mixers intended for wireless local loop (WLL) and digital microwave radio (DMR) applications in the 3.4GHz to 3.8GHz frequency band. The MAX2683 is optimized for downconversion to IF frequencies between 100MHz and 400MHz, and allows both high-side and low-side local oscillator (LO) injection. The MAX2684…
MAX2991 Power-Line Communications (PLC) Integrated Analog Front-End Transceiver The MAX2991 power-line communication analog front-end (AFE) is a state-of-the-art integrated circuit that delivers high integration and superb performance, while reducing the total system cost. The MAX2991 is the first AFE specifically designed for OFDM (orthogonal frequency division multiplexing) modulated signal transmission over power lines. Operating in the 10kHz to 490kHz band,…
MAX3013 +1.2V to +3.6V, 0.1µA, 100Mbps, 8-Channel Level Translators The MAX3013 8-channel level translator provides the level shifting necessary to allow 100Mbps data transfer in a multivoltage system. Externally applied voltages, VCC and VL, set the logic levels on either side of the device. Logic signals present on the VL side of the device appear as a higher voltage logic…
MAX3080 Fail-Safe, High-Speed (10Mbps), Slew-Rate-Limited RS-485/RS-422 Transceivers The MAX3080-MAX3089 high-speed transceivers for RS-485/RS-422 communication contain one driver and one receiver. These devices feature fail-safe circuitry, which guarantees a logic-high receiver output when the receiver inputs are open or shorted. This means that the receiver output will be a logic high if all transmitters on a terminated bus are disabled (high…
MAX3080E ±15kV ESD-Protected, Fail-Safe, High-Speed (10Mbps), Slew-Rate-Limited RS-485/RS-422 Transceivers The MAX3080E–MAX3089E are ±15kV electrostatic discharge (ESD)-protected, high-speed transceivers for RS-485/RS-422 communication that contain one driver and one receiver. These devices feature fail-safe circuitry, which guarantees a logic-high receiver output when the receiver inputs are open or shorted. This means that the receiver output will be a logic high if all…
MAX3221 +3V to +5.5V RS-232 Transceivers with AutoShutdown The MAX3221/MAX3223/MAX3243 achieve 1µA supply current with Maxim’s revolutionary AutoShutdown™ feature. When the MAX3221/MAX3223/MAX3243 do not sense a valid signal level on their receiver inputs, the on-board power supply and drivers shut down. This occurs if the RS-232 cable is disconnected or if the transmitters of the connected peripheral are turned off.…
MAX3223 +3V to +5.5V RS-232 Transceivers with AutoShutdown The MAX3221/MAX3223/MAX3243 achieve 1µA supply current with Maxim’s revolutionary AutoShutdown™ feature. When the MAX3221/MAX3223/MAX3243 do not sense a valid signal level on their receiver inputs, the on-board power supply and drivers shut down. This occurs if the RS-232 cable is disconnected or if the transmitters of the connected peripheral are turned off.…
MAX3241 3.0V to 5.5V, Low-Power, Up to 1Mbps, True RS-232 Transceivers The MAX3222/MAX3232/MAX3237/MAX3241 transceivers have a proprietary low-dropout transmitter output stage enabling true RS-232 performance from a 3.0V to 5.5V supply with a dual charge pump. The devices require only four small 0.1µF external charge-pump capacitors. The MAX3222, MAX3232, and MAX3241 are guaranteed to run at data rates of 120kbps…
MAX3386E 3.0V, ±15kV ESD-Protected RS-232 Transceivers for PDAs and Cell Phones The MAX3386E 3V-powered EIA/TIA-232 and V.28/V.24 is a communications interface with low power requirements, high data-rate capabilities, and enhanced electrostatic discharge (ESD) protection. The MAX3386E has two receivers and three transmitters. All RS-232 inputs and outputs are protected to ±25kV using the IEC 1000-4-2 Air-Gap Discharge method, ±8kV using…
MAX354 Fault-Protected Analog Multiplexers The MAX354/MAX355 fault-protected multiplexers (muxes) use a series N-channel, P-channel, N-channel structure that protects the devices from overvoltage up to 40V beyond the supply rails during power-up, power-down, and fault conditions. The MAX354/MAX355 also protect sensitive circuit components against voltages near or beyond the normal supplies. 50PCS MOQ STRIP OF TAPE / ORDER MULTIPLE 50PCS STRIP…
MAX3885 +3.3V, 2.488Gbps, SDH/SONET 1:16 Deserializer with LVDS Outputs The MAX3885 deserializer is ideal for converting 2.488Gbps serial data to 16-bit wide, 155Mbps parallel data in SDH/SONET applications. Operating from a single +3.3V supply, this device accepts PECL serial clock and data inputs, and delivers low-voltage differential-signal (LVDS) clock and data outputs for interfacing with high-speed digital circuitry. It also…
MAX398 Precision, 8-Channel/Dual 4-Channel, Low-Voltage, CMOS Analog Multiplexers The MAX398/MAX399 precision, monolithic, CMOS analog multiplexers (muxes) offer low on-resistance (less than 100Ω), which is matched to within 6Ω between channels and remains flat over the specified analog signal range (11Ω max). They also offer low leakage over temperature (NO off-leakage current less than 2.5nA at +85°C) and fast switching speeds…
MAX4071 Bidirectional, High-Side, Current-Sense Amplifiers with Reference The MAX4069–MAX4072 low-cost, bidirectional, high-side, current-sense amplifiers are ideal for monitoring battery charge and discharge currents in notebooks, cell phones, and other portable equipment. They feature up to 24V input common-mode voltage range, low 100µA supply current (which drops to only 10µA in shutdown), and a total output error of less than 1.5%.…
MAX4122 Single/Dual/Quad, Wide-Bandwidth, Low-Power, Single-Supply Rail-to-Rail I/O Op Amps The MAX4122–MAX4129 family of operational amplifiers combines wide bandwidth and excellent DC accuracy with rail-to-rail operation at the inputs and outputs. These devices require only 650µA per amplifier, and operate from either a single supply (+2.7V to +6.5V) or dual supplies (±1.35V to ±3.25V) with a common-mode voltage range that extends…
MAX4365 - 1.4W and 1W, Ultra-Small, Audio Power Amplifiers with Shutdown The MAX4364/MAX4365 are bridged audio power amplifiers intended for portable audio devices with internal speakers. The MAX4364 is capable of delivering 1.4W from a single 5V supply and 500mW from a single 3V supply into an 8Ω load. The MAX4365 is capable of delivering 1W from a single 5V…
MAX4372 Low-Cost, UCSP/SOT23, Micropower, High-Side Current-Sense Amplifier with Voltage Output The MAX4372 low-cost, precision, high-side current-sense amplifier is available in a tiny, space-saving SOT23 5-pin package. Offered in three gain versions (T = 20V/V, F = 50V/V, and H = 100V/V), this device operates from a single 2.7V to 28V supply and consumes only 30µA. It features a voltage output…
MAX4389 Ultra-Small, Low-Cost, 85MHz Op Amps with Rail-to-Rail Outputs and Disable The MAX4389/MAX4390/MAX4392–MAX4396 family of op amps are unity-gain stable devices that combine high-speed performance, rail-to-rail outputs, and disable mode. These devices are targeted for applications where an input or an output is exposed to the outside world, such as video and communications. 50PCS MOQ STRIP OF TAPE / ORDER…
MAX4412 Low-Cost, Low-Power, Ultra-Small, 3V/5V, 500MHz Single-Supply Op Amps with Rail-to-Rail Outputs The MAX4412 single and MAX4413 dual operational amplifiers are unity-gain-stable devices that combine high-speed performance, low supply current, and ultra-small packaging. Both devices operate from a single +2.7V to +5.5V supply, have rail-to-rail outputs, and exhibit a common-mode input voltage range that extends from 100mV below ground to…
MAX44241 36V, Low-Noise, Precision, Single/Quad/Dual Op Amps The MAX44241/MAX44243/MAX44246 are 36V, ultra- precision, low-noise, low-drift, single/quad/dual opera- tional amplifiers that offer near-zero DC offset and drift through the use of patented chopper stabilized and auto-zeroing techniques. This method constantly mea- sures and compensates the input offset, eliminating drift over time and temperature and the effect of 1/f noise. These single/quad/dual…
MAX4428 Dual High-Speed, 1.5A MOSFET Drivers The MAX4426/MAX4427/MAX4428 are dual monolithic MOSFET drivers designed to translate TTL/CMOS inputs to high voltage/current outputs. The MAX4426 is a dual inverting power MOSFET driver. The MAX4427 is a dual noninverting power MOSFET driver, and the MAX4428 contains one inverting section and one noninverting section. Delay times are nearly independent of VDD (see Typical…
MAX4466 Low-Cost, Micropower, SC70/SOT23-8, Microphone Preamplifiers with Complete Shutdown The MAX4465–MAX4469 are micropower op amps optimized for use as microphone preamplifiers. They provide the ideal combination of an optimized gain bandwidth product vs. supply current, and low-voltage operation in an ultra-small package. The MAX4465/MAX4467/MAX4469 are unity-gain stable and deliver a 200kHz gain bandwidth from only 24µA of supply current. The…
MAX4648 25 Ohm SPST Analog Switches in SOT23-6 The MAX4647/MAX4648 are dual-supply single-pole/single-throw (SPST) switches. On-resistance is 25Ω max and flat (2Ω max) over the specified signal range. Each switch can handle rail-to-rail analog signals. Off-leakage current is only 1nA max at +25°C. They conduct analog or digital signals equally well in either direction. The primary application areas are in…
MAX4707 Low-Voltage, 2Ω, SPST, CMOS Analog Switches The MAX4706/MAX4707 single-pole/single-throw (SPST) switches operate from a single 1.8V to 5.5V supply. The MAX4706 is a normally closed (NC) switch and the MAX4707 is the normally open (NO) version. These switches provide 2Ω on-resistance (RON) and 0.6Ω RON flatness with a +2.7V supply. These devices typically consume only 0.02µA of quiescent current,…
MAX4714 0.8-Ohm, Low-Voltage, Single-Supply SPDT Analog Switch in SC70 The MAX4714 is a low on-resistance, low-voltage single-pole/double-throw (SPDT) analog switch that operates from a single +1.6V to +3.6V supply. The MAX4714 has break-before-make switching. This device also has fast switching speeds (tON = 18ns max, tOFF = 12ns max).When powered from a +3V supply, the MAX4714 features 0.8Ω max on-resistance…
MAX4717 4.5Ω/20Ω, 300MHz Bandwidth, Dual SPDT Analog Switches in UCSP The MAX4717/MAX4718 low-voltage, low on-resistance (RON), dual single-pole/double-throw (SPDT) analog switches operate from a single +1.8V to +5.5V supply. These devices are designed for USB 1.1 and audio switching applications.The MAX4717 features two 4.5Ω RON (max) SPDT switches with 1.2Ω flatness and 0.3Ω matching between channels. The MAX4718 features one…
MAX4788 50mA/100mA Current-Limit Switches The MAX4785-MAX4788 family of switches feature internal current limiting to prevent host devices from being damaged due to faulty load conditions. These analog switches have a low 0.7Ω on-resistance and operate from a 2.3V to 5.5V input voltage range. They are available with guaranteed 50mA and 100mA current limits, making them ideal for load-switching applications. Price…
MAX4906EF High-/Full-Speed USB 2.0 Switches with High ESD The MAX4906EF are electrostatic discharge (ESD)-protected analog switches that combine low on-capacitance (CON) and low on-resistance (RON) necessary for high-performance switching applications. The COM_ inputs are protected against ±15kV ESD without latchup or damage. The device is designed for USB 2.0 high-speed applications at 480Mbps. The switches also handle all the requirements…
MAX5048 7.6A, 12ns, SOT23/TDFN MOSFET Driver The MAX5048A/MAX5048B are high-speed MOSFET drivers capable of sinking/sourcing 7.6A/1.3A peak currents. These devices take logic input signals and drive a large external MOSFET. The MAX5048A/MAX5048B have inverting and noninverting inputs that give the user greater flexibility in controlling the MOSFET. They feature two separate outputs working in complementary mode, offering flexibility in controlling…
MAX512 Low-Cost, Triple, 8-Bit Voltage-Output DACs with Serial Interface The MAX512/MAX513 contain three 8-bit, voltage-output digital-to-analog converters (DAC A, DAC B, and DAC C). Output buffer amplifiers for DACs A and B provide voltage outputs while reducing external component count. The output buffer for DAC A can source or sink 5mA to within 0.5V of VDD or VSS. The buffer…
MAX518 2-Wire, Serial, 8-Bit DACs with Rail-to-Rail Outputs The MAX517/MAX518/MAX519 are 8-bit voltage output digital-to-analog converters (DACs) with a simple 2-wire serial interface that allows communication between multiple devices. They operate from a single 5V supply and their internal precision buffers allow the DAC outputs to swing rail-to-rail.The MAX517 is a single DAC and the MAX518/MAX519 are dual DACs. The…
MAX5382 Low-Cost, Low-Power, 8-Bit DACs with 2-Wire Serial Interface in SOT23 The MAX5380/MAX5381/MAX5382 are low-cost, 8-bit digital-to-analog converters (DACs) in miniature 5-pin SOT23 packages, with a simple 2-wire serial interface that allows communication with multiple devices. The MAX5380 has an internal +2V reference and operates from a +2.7V to +3.6V supply. The MAX5381 has an internal +4V reference and operates…
MAX5482 10-Bit, Nonvolatile, Linear-Taper Digital Potentiometers The MAX5481–MAX5484 10-bit (1024-tap) nonvolatile, linear-taper, programmable voltage-dividers and variable resistors perform the function of a mechanical potentiometer, but replace the mechanics with a pin-configurable 3-wire serial SPI™-compatible interface or up/down digital interface. The MAX5481/MAX5482 are 3-terminal voltage-dividers and the MAX5483/MAX5484 are 2-terminal variable resistors. Price Quantity Quantity 1 – 24 = €2.85
MAX5904 Low-Voltage, Dual Hot-Swap Controllers/Power Sequencers The MAX5904-MAX5909 dual hot-swap controllers provide complete protection for dual-supply systems. These devices hot swap two supplies ranging from +1V to +13.2V, provided one supply is at or above 2.7V, allowing the safe insertion and removal of circuit cards into live backplanes. 50PCS MOQ / ORDER MULTIPLE 50PCS Price Quantity Quantity 1 – 24…
MAX5930 Low-Voltage, Triple, Hot-Swap Controllers/Power Sequencers/Voltage Trackers The MAX5930/MAX5931 +1V to +13.2V triple hot-swap controllers provide complete protection for multisupply systems. They allow the safe insertion and removal of circuit cards into live backplanes. These devices hot swap multiple supplies ranging from +1V to +13.2V, provided one supply is at or above +2.7V and only one supply is above 11V.…
MAX6006A 1µA SOT23 Precision Shunt Voltage Reference The MAX6006–MAX6009 ultra-low-power shunt references are ideal for space-critical and low-power applications. They are offered in 3-pin SOT23 packages, and the minimum operating current is guaranteed to be < 1µA. The devices feature low temperature coefficients of < 30ppm/°C and initial accuracy of better than 0.2%. Price Quantity Quantity 1 – 24 =…
MAX6007A 1µA SOT23 Precision Shunt Voltage Reference The MAX6006–MAX6009 ultra-low-power shunt references are ideal for space-critical and low-power applications. They are offered in 3-pin SOT23 packages, and the minimum operating current is guaranteed to be < 1µA. The devices feature low temperature coefficients of < 30ppm/°C and initial accuracy of better than 0.2%. 50PCS MOQ / ORDER MULTIPLE 50PCS STRIP…
MAX6008A 1µA SOT23 Precision Shunt Voltage Reference The MAX6006–MAX6009 ultra-low-power shunt references are ideal for space-critical and low-power applications. They are offered in 3-pin SOT23 packages, and the minimum operating current is guaranteed to be < 1µA. The devices feature low temperature coefficients of < 30ppm/°C and initial accuracy of better than 0.2%. 50PCS MOQ / ORDER MULTIPLE 50PCS STRIP…
MAX6061 Precision, Micropower, Low-Dropout, High-Output-Current, SOT23 Voltage References The MAX6061-MAX6068 are precision, low-dropout, micropower voltage references. These three-terminal devices operate with an input voltage range from (VOUT + 50mV typ) to 12.6V and are available with output voltage options of 1.25V, 1.8V, 2.048V, 2.5V, 3V, 4.096V, 4.5V, and 5V. They feature a proprietary curvature-correction circuit and laser-trimmed thin-film resistors that…
MAX608 5V or Adjustable, Low-Voltage, Step-Up DC-DC Controller The MAX608 low-voltage step-up controller operates from a 1.8V to 16.5V input voltage range. Pulse-frequency-modulation (PFM) control provides high efficiency at heavy loads, while using only 85µA (typical) when operating with no load. In addition, a logic-controlled shutdown mode reduces supply current to 2µA typical. The output voltage is factory-set at 5V…
IC VREF SERIES 0.4% SOT23-3 Series Voltage Reference IC ±0.4% SOT-23-3 100PCS MOQ / ORDER MULTIPLE 100PCS STRIP OF TAPE Price Quantity Quantity 100 – 499 = €0.31 Quantity 500 + = €0.30
MAX6125 SOT23, Low-Cost, Low-Dropout, 3-Terminal Voltage References The MAX6125/MAX6141/MAX6145/MAX6150/MAX6160 low-dropout, micropower, three-terminal voltage references offer 2.5V, 4.096V, 4.5V, 5.0V, and adjustable (1.23V to 12.4V) output voltages, respectively. Low, 200mV dropout makes these devices ideal for 3V and 5V systems. Unlike two-terminal references that waste battery current and require an external resistor, the MAX61xx family's supply current is virtually independent of…
MAX629 28V, Low-Power, High-Voltage, Boost or Inverting DC-DC Converter The MAX629 low-power DC-DC converter features an internal N-channel MOSFET switch and programmable current limiting. It is designed to supply positive or negative bias voltages up to ±28V from input voltages in the 0.8V to VOUT range, and can be configured for boost, flyback, and SEPIC topologies. Price Quantity Quantity 1…
MAX6301 +5V, Low-Power, µP Supervisory Circuits with Adjustable Reset/Watchdog The MAX6301–MAX6304 low-power microprocessor (µP) supervisory circuits provide maximum adjustability for reset and watchdog functions. The reset threshold can be adjusted to any voltage above 1.22V, using external resistors. In addition, the reset and watchdog timeout periods are adjustable using external capacitors. A watchdog select pin extends the watchdog timeout period…
MAX6345 6-Pin µP Reset Circuit with Power-Fail Comparator The MAX6342-MAX6345 family of microprocessor (µP) supervisory circuits monitors power supplies in digital systems. These devices significantly improve system reliability and accuracy compared to separate ICs or discrete components. 250PCS MOQ / ORDER MULTIPLE 250PCS STRIP OF TAPE Price Quantity Quantity 1 – 24 = €0.65 Quantity 25 – 99 = €0.60…
MAX6364 SOT23, Low-Power Microprocessor Supervisory Circuits with Battery Backup The MAX6361–MAX6364 supervisory circuits reduce the complexity and number of components required for power-supply monitoring and battery control functions in microprocessor (µP) systems. The circuits significantly improve system reliability and accuracy compared to that obtainable with separate ICs or discrete components. Their functions include µP reset, backup battery switchover, and power…
MAX6366 SOT23, Low-Power µP Supervisory Circuits with Battery Backup and Chip-Enable Gating The MAX6365–MAX6368 supervisory circuits simplify power-supply monitoring, battery-backup control functions, and memory write protection in microprocessor (µP) systems. The circuits significantly improve the size, accuracy, and reliability of modern systems with an ultra-small integrated solution. 100PCS MOQ / ORDER MULTIPLE 100PCS STRIP OF TAPE Price Quantity Quantity 1…
MAX6437 Low-Power, Single/Dual-Level Battery Monitors with Hysteresis The MAX6427-MAX6438 are single/dual-level battery monitors with internal hysteresis. These devices are offered with single (MAX6427/MAX6428/MAX6429, MAX6433/MAX6434/MAX6435) or dual (MAX6430/MAX6431/MAX6432, MAX6436/MAX6437/MAX6438) low-battery output indicators, which can be used to indicate three battery conditions: battery is good (operate system in normal mode), battery is weak (operate system in low-power mode), or battery is empty…
MAX6467 Microprocessor Supervisory Reset Circuits with Edge-Triggered, One-Shot Manual Reset The MAX6467/MAX6468 microprocessor (µP) supervisory circuits monitor single power-supply voltages from +1.8V to +5.0V and assert a reset if the supply voltage drops below its preset threshold. An edge-triggered, one-shot manual reset function ensures that the µP enters the reset mode for a fixed timeout period only, even in the…
MAX6628 Remote ±1°C Accurate Digital Temperature Sensors with SPI-Compatible Serial Interface The MAX6627/MAX6628 precise digital temperature sensors report the temperature of a remote sensor. The remote sensor is a diode-connected transistor, typically a low-cost, easily mounted 2N3904 NPN type that replaces conventional thermistors or thermocouples. The MAX6627/MAX6628 can also measure the die temperature of other ICs, such as microprocessors (µPs)…
MAX6816 ±15kV ESD-Protected, Single/Dual/Octal, CMOS Switch Debouncers The MAX6816/MAX6817/MAX6818 are single, dual, and octal switch debouncers that provide clean interfacing of mechanical switches to digital systems. They accept one or more bouncing inputs from a mechanical switch and produce a clean digital output after a short, preset qualification delay. Both the switch opening bounce and the switch closing bounce are…
MAX6822 Low-Voltage SOT23 µP Supervisors with Manual Reset and Watchdog Timer The MAX6821—MAX6825 are low-voltage microprocessor (µP) supervisory circuits that combine voltage monitoring, watchdog timer, and manual reset input functions in a 5-pin SOT23 package. Microprocessor supervisory circuits significantly improve system reliability and accuracy compared to separate ICs or discrete components. These devices assert a reset signal whenever the monitored…
MAX6896 Ultra-Small, Adjustable Sequencing/Supervisory Circuits The MAX6895–MAX6899 is a family of small, low-power, voltage-monitoring circuits with sequencing capability. These miniature devices offer tremendous flexibility with an adjustable threshold capable of monitoring down to 0.5V and an external capacitor-adjustable time delay. These devices are ideal for use in power-supply sequencing, reset sequencing, and power-switching applications. Multiple devices can be cascaded for…
MAX6897 - Ultra-Small, Adjustable Sequencing/Supervisory Circuits The MAX6895–MAX6899 is a family of small, low-power, voltage-monitoring circuits with sequencing capability. These miniature devices offer tremendous flexibility with an adjustable threshold capable of monitoring down to 0.5V and an external capacitor-adjustable time delay. These devices are ideal for use in power-supply sequencing, reset sequencing, and power-switching applications. Multiple devices can be cascaded…
MAX691A Microprocessor Supervisory Circuits The MAX691A/MAX693A/MAX800L/MAX800M microprocessor (µP) supervisory circuits are pin-compatible upgrades to the MAX691, MAX693, and MAX695. They improve performance with 30µA supply current, 200ms typ reset active delay on power-up, and 6ns chip-enable propagation delay. Features include write protection of CMOS RAM or EEPROM, separate watchdog outputs, backup-battery switchover, and an active-low RESET output that is valid…
MAX702 Power-Supply Monitor with Reset The MAX700/MAX701/MAX702 are supervisory circuits used to monitor the power supplies in microprocessor (µP) and digital systems. The active-low RESET/RESET outputs of the MAX700/MAX701/MAX702 are guaranteed to be in the correct state for VCC voltages down to +1V (Figure 4). They provide excellent circuit reliability and low cost by eliminating external components and adjustments when…
MAX704T 3.0V/3.3V Microprocessor Supervisory Circuits These microprocessor (µP) supervisory circuits reduce the complexity and number of components required for power-supply monitoring and battery-control functions in µP systems. They significantly improve system reliability and accuracy compared to separate ICs or discrete components. 50PCS MOQ / ORDER MULTIPLE 50PCS Price Quantity Quantity 1 – 24 = €1.54 Quantity 25 – 99 =…
MAX712 NiCd/NiMH Battery Fast-Charge Controllers The MAX712/MAX713 fast-charge Nickel Metal Hydride (NiMH) and Nickel Cadmium (NiCd) batteries from a DC source at least 1.5V higher than the maximum battery voltage. 1 to 16 series cells can be charged at rates up to 4C. A voltage-slope detecting analog-to-digital converter, timer, and temperature window comparator determine charge completion. The MAX712/MAX713 are powered…
MAX7318 2-Wire-Interfaced, 16-Bit, I/O Port Expander with Interrupt and Hot-Insertion Protection The MAX7318 2-wire-interfaced expander provides 16-bit parallel input/output (I/O) port expansion for SMBus™ and I²C applications. The MAX7318 consists of input port registers, output port registers, polarity inversion registers, configuration registers, and an I²C-compatible serial interface logic compatible with SMBus. The system master can invert the MAX7318 input data…
MAX770 5V/12V/15V or Adjustable, High-Efficiency Low-IQ, Step-Up DC-DC Controllers The MAX770-MAX773 step-up switching controllers provide 90% efficiency over a 10mA to 1A load. A unique current-limited pulse-frequency-modulation (PFM) control scheme gives these devices the benefits of pulse-width-modulation (PWM) converters (high efficiency at heavy loads), while using less than 110µA of supply current (vs. 2mA to 10mA for PWM converters). Price…
MAX794 3.0V/3.3V Adjustable Microprocessor Supervisory Circuits The MAX793/MAX794/MAX795 microprocessor (µP) supervisory circuits monitor and control the activities of +3.0V/+3.3V µPs by providing backup-battery switchover, among other features such as low-line indication, µP reset, write protection for CMOS RAM, and a watchdog (see the Selector Guide in the full data sheet). The backup-battery voltage can exceed VCC, permitting the use of…
MAX814 ±1% Accuracy, Low-Power, +3V and +5V µP Supervisory Circuits The MAX814/MAX815/MAX816 are high-accuracy microprocessor (µP) supervisory circuits that provide power-on reset, watchdog, and power-fail functions. They eliminate manual trimming and improve reliability in critical applications needing high-accuracy reset thresholds. The active-low RESET output is guaranteed to be in the correct state for VCC down to 1V. The reset comparator…
MAX823 5-Pin Microprocessor Supervisory Circuits with Watchdog Timer and Manual Reset The MAX823/MAX824/MAX825 microprocessor (µP) supervisory circuits combine reset output, watchdog, and manual reset input functions in 5-pin SOT23 and SC70 packages. They significantly improve system reliability and accuracy compared to separate ICs or discrete components. The MAX823/MAX824/MAX825 are specifically designed to ignore fast transients on VCC. 50PCS MOQ /…
MAX824 5-Pin Microprocessor Supervisory Circuits with Watchdog Timer and Manual Reset The MAX823/MAX824/MAX825 microprocessor (µP) supervisory circuits combine reset output, watchdog, and manual reset input functions in 5-pin SOT23 and SC70 packages. They significantly improve system reliability and accuracy compared to separate ICs or discrete components. The MAX823/MAX824/MAX825 are specifically designed to ignore fast transients on VCC 100PCS MOQ /…
MAX834 Micropower, Latching Voltage Monitors in SOT23-5 The MAX834/MAX835 micropower voltage monitors contain a 1.204V precision bandgap reference, comparator, and latched output in a 5-pin SOT23 package. Using the latched output prevents deep discharge of batteries. The MAX834 has an open-drain, n-channel output driver, while the MAX835 has a push-pull output driver. Two external resistors set the trip-threshold voltage. 100PCS…
MAX8543 Step-Down Controllers with Prebias Startup, Lossless Sensing, Synchronization, and OVP The MAX8543/MAX8544 current-mode, constant-frequency PWM buck controllers operate from a 3V to 13.2V input supply and generate adjustable 0.8V to 0.9 x VIN output voltages at loads up to 25A. They feature adjustable switching frequency and synchronization for noise-sensitive applications. 250PCS MOQ / ORDER MULTIPLE 250PCS STRIP OF TAPE…
MAX8552 High-Speed, Wide-Input, Single-Phase MOSFET Driver The MAX8552 highly integrated monolithic MOSFET driver can drive a pair of power MOSFETs in single or multiphase synchronous buck-converter applications that provide up to 30A output current per phase. The MAX8552 simplifies PC board layout in multiphase systems, particularly three phases and higher. High input voltages up to 24V allow the MAX8552 to…
MAX8596 High-Efficiency, 36V Step-Up Converters with TA Derating Option for 2 to 9 White LEDs The MAX8595X/MAX8596X drive up to nine white LEDs with constant current and high efficiency to provide LCD backlighting in cell phones, PDAs, and other handheld devices. The series connection allows the LED currents to be identical for uniform brightness and minimizes the number of traces…
MAX8606 USB/AC Adapter, Li+ Linear Battery Charger with Integrated 50m Ohm Battery Switch in TDFN The MAX8606 complete 1-cell Li+ battery charge-management IC operates from either a USB port or AC adapter. It integrates a battery disconnect switch, current-sense circuit, PMOS pass element, and thermal-regulation circuitry, while eliminating the external reverse-blocking Schottky diode, to create a simple and small charging…
MAX870 Switched-Capacitor Voltage Inverters The ultra-small MAX870/MAX871 monolithic, CMOS charge-pump inverters accept input voltages ranging from +1.4V to +5.5V. The MAX870 operates at 125kHz, and the MAX871 operates at 500kHz. Their high efficiency (90%) and low operating current (0.7mA for the MAX870) make these devices ideal for both battery-powered and board-level voltage-conversion applications. 100PCS MOQ / ORDER MULTIPLE 100PCS STRIP…
MAX8713 Simplified Multichemistry SMBus Battery Charge The MAX8713 multichemistry battery charger simplifies construction of smart chargers with a minimum number of external components. It uses the Intel System Management Bus (SMBus™) to control the charge voltage and charge current. High efficiency is achieved through the use of a constant off-time step-down topology with synchronous rectification.The MAX8713 charges one to four…
MAX8724 Low-Cost Multichemistry Battery Chargers The MAX1908/MAX8724/MAX8765/MAX8765A highly integrated, multichemistry battery-charger control ICs simplify the construction of accurate and efficient chargers. These devices use analog inputs to control charge current and voltage, and can be programmed by the host or hardwired. The MAX1908/MAX8724/MAX8765/MAX8765A achieve high efficiency using a buck topology with synchronous rectification. Price Quantity Quantity 1 – 24 =…
MAX8725 Multichemistry Battery Chargers with Automatic System Power Selector The MAX1909/MAX8725 highly integrated control ICs simplify construction of accurate and efficient multichemistry battery chargers. The MAX1909/MAX8725 use analog inputs to control charge current and voltage, and can be programmed by a host microcontroller (µC) or hardwired. High efficiency is achieved through use of buck topology with synchronous rectification. Price Quantity…
MAX882 5V/3.3V or Adjustable, Low-Dropout, Low-IQ, 200mA Linear Regulator with Standby Mode The MAX882/MAX883/MAX884 linear regulators maximize battery life by combining ultra-low supply currents and low dropout voltages. They feature 200mA output current capability at up to +125°C junction temperature and come in a 1.5W SOIC package. The 1.5W package (compared to 0.47W for standard SOIC packages) allows a wider…
MAX8856 USB/AC Adapter, Li+ Linear Battery Charger with Integrated 50mΩ Battery Switch in TDFN The MAX8856 complete 1-cell Li+ battery charge-management IC operates from either a USB port or AC adapter. It integrates a battery disconnect switch, current-sense circuit, PMOS pass element, and thermal-regulation circuitry, while eliminating the external reverse-blocking Schottky diode, to create a simple and small charging solution.…
MAX8877 Low-Noise, Low-Dropout, 150mA Linear Regulators with '2982 Pinout The MAX8877/MAX8878 low-noise, low-dropout linear regulators operate from a 2.5V to 6.5V input and deliver up to 150mA. These devices are pin-compatible with the industry-standard '2982 and offer an improved dropout voltage. Typical output noise is 30µVRMS, and typical dropout is only 165mV at 150mA. The output voltage is preset to…
MAX8878 Low-Noise, Low-Dropout, 150mA Linear Regulators with '2982 Pinout The MAX8877/MAX8878 low-noise, low-dropout linear regulators operate from a 2.5V to 6.5V input and deliver up to 150mA. These devices are pin-compatible with the industry-standard '2982 and offer an improved dropout voltage. Typical output noise is 30µVRMS, and typical dropout is only 165mV at 150mA. The output voltage is preset to…
MAX8880 12V, Ultra-Low-IQ, Low-Dropout Linear Regulators with POK The MAX8880/MAX8881 are ultra-low supply current, low-dropout linear regulators, capable of delivering up to 200mA. They are designed for battery-powered applications where reverse battery protection and long battery life are critical. 100PCS MOQ / ORDER MULTIPLE 100PCS STRIP OF TAPE Price Quantity Quantity 1 – 24 = €1.66 Quantity 25 – 99…
MAX8891 High PSRR, Low-Dropout, 150mA Linear Regulators The MAX8891/MAX8892 low-dropout (LDO) linear regulators are designed to deliver up to 150mA continuous output current. These regulators achieve a low 120mV dropout for 120mA load current. Price Quantity Quantity 1 – 24 = €0.41
MAX889 High-Frequency, Regulated, 200mA, Inverting Charge Pump The MAX889 inverting charge pump delivers a regulated negative output voltage at loads of up to 200mA. The device operates with inputs from 2.7V to 5.5V to produce an adjustable, regulated output from -2.5V to -VIN. Price Quantity Quantity 1 – 24 = €3.21
DRIVER, LED, WHITE, H/EFFICIENCY, SMD; Topology:Boost; No. of Outputs:1; Output Highest Efficiency Supply for 2 to 6 Series WLEDs in a 2mm x 2mm TDFN Package IC LED DRVR RGLTR DIM 25MA 8TDFN Highest Efficiency Supply 8-Pin TDFN EP T/R DRIVER, LED, WHITE, H/EFFICIENCY, SMD; LED Driver Application:Backlighting, Cellular Phones; Topology:Boost; No. of Outputs:1; Output Current:24.75mA; Output Voltage:25V; Input Voltage:2.6V…
MAX9016 SOT23, Dual, Precision, 1.8V, Nanopower Comparators With/Without Reference The single MAX9015/MAX9016 and dual MAX9017–MAX9020 nanopower comparators in space-saving SOT23 packages feature Beyond-the-Rails™ inputs and are guaranteed to operate down to 1.8V. The A-grade packages feature an on-board 1.236V ±1% reference, while the B-grade packages feature a 1.24V ±1.75% reference. An ultra-low supply current of 0.85µA (MAX9019/MAX9020), 1µA (MAX9015/MAX9016), or…
MAX9017 SOT23, Dual, Precision, 1.8V, Nanopower Comparators With/Without Reference The single MAX9015/MAX9016 and dual MAX9017–MAX9020 nanopower comparators in space-saving SOT23 packages feature Beyond-the-Rails™ inputs and are guaranteed to operate down to 1.8V. The A-grade packages feature an on-board 1.236V ±1% reference, while the B-grade packages feature a 1.24V ±1.75% reference. An ultra-low supply current of 0.85µA (MAX9019/MAX9020), 1µA (MAX9015/MAX9016), or…
MAX9075 Low-Cost, Ultra-Small, 3µA Single-Supply Comparators The MAX9075/MAX9077 single/dual comparators are optimized for 3V and 5V single-supply applications. These comparators have a 580ns propagation delay and consume just 3µA per comparator. The combination of low-power, single-supply operation down to 2.1V, and ultra-small footprint makes these devices ideal for all portable applications. 100PCS MOQ / ORDER MULTIPLE 100PCS STRIP OF TAPE…
MAX9175 670MHz LVDS-to-LVDS and Anything-to-LVDS 1:2 Splitters The MAX9174/MAX9175 are 670MHz, low-jitter, low-skew 1:2 splitters ideal for protection switching, loopback, and clock and signal distribution. The devices feature ultra-low 1.0ps(RMS) random jitter (max) that ensures reliable operation in high-speed links that are highly sensitive to timing errors. Price Quantity Quantity 1 – 24 = €3.63
€0.84Original price was: €0.84.€0.00Current price is: €0.00.
MAX919 SOT23, 1.8V, Nanopower, Beyond-the-Rails Comparators With/Without Reference The MAX917–MAX920 nanopower comparators in space-saving SOT23 packages feature Beyond-the-Rails™ inputs and are guaranteed to operate down to +1.8V. The MAX917/MAX918 feature an on-board 1.245V ±1.5% reference and draw an ultra-low supply current of only 750nA, while the MAX919/MAX920 (without reference) require just 380nA of supply current. These features make the MAX917–MAX920…
MAX9259 Gigabit Multimedia Serial Link with Spread Spectrum and Full-Duplex Control Channel The MAX9259 serializer pairs with the MAX9260 deserializer for joint transmission of high-speed video, audio, and control data.The MAX9259/MAX9260 operate up to 3.125Gbps for a 15m shielded twisted-pair (STP) cable. This serial link supports display panels from QVGA (320 x 240) up to XGA (1280 x 768), or…
MAX9320 1:2 Differential LVPECL/LVECL/HSTL Clock and Data Drivers The MAX9320/MAX9320A are low-skew, 1-to-2 differential drivers designed for clock and data distribution. The input is reproduced at two differential outputs. The differential input can be adapted to accept single-ended inputs by applying an external reference voltage. Price Quantity Quantity 1 – 24 = €4.96
MAX9632 36V, Precision, Low-Noise, Wide-Band Amplifier The MAX9632 is a low-noise, precision, wide-band operational amplifier that can operate in a very wide +4.5V to +36V supply voltage range. The IC operates in dual (±18V) or single-supply mode (36V). Price Quantity Quantity 1 – 24 = €4.36
MAX9632 36V, Precision, Low-Noise, Wide-Band Amplifier The MAX9632 is a low-noise, precision, wide-band operational amplifier that can operate in a very wide +4.5V to +36V supply voltage range. The IC operates in dual (±18V) or single-supply mode (36V). Price Quantity Quantity 1 – 24 = €4.36
MAX9632 36V, Precision, Low-Noise, Wide-Band Amplifier The MAX9632 is a low-noise, precision, wide-band operational amplifier that can operate in a very wide +4.5V to +36V supply voltage range. The IC operates in dual (±18V) or single-supply mode (36V). Price Quantity Quantity 1 – 24 = €4.36
MAX9716 Low-Cost, Mono, 1.4W BTL Audio Power Amplifiers The MAX9716/MAX9717 audio power amplifiers are ideal for portable audio devices with internal speakers. A bridge-tied load (BTL) architecture minimizes external component count, while providing high-quality audio reproduction. Both devices deliver 1.4W continuous power into a 4Ω load with less than 1% Total Harmonic Distortion (THD) while operating from a single +5V…
MAX9759 3.2W, High-Efficiency, Low-EMI, Filterless, Class D Audio Amplifier The MAX9759 mono Class D, audio power amplifier provides Class AB amplifier audio performance with the benefits of Class D efficiency, eliminating the need for a heatsink and extending battery life. The MAX9759 delivers up to 3.2W of continuous power into a 4Ω load while offering greater than 90% efficiency. Maxim's…
MAX987 High-Speed, Micropower, Low-Voltage, Rail-to-Rail I/O Comparators The MAX987/MAX988/MAX991/MAX992/MAX995/ MAX996 single/dual/quad micropower comparators feature low-voltage operation and rail-to-rail inputs and outputs. Their operating voltage ranges from +2.5V to +5.5V, making them ideal for both 3V and 5V systems. These comparators also operate with ±1.25V to ±2.75V dual supplies. They consume only 48µA per comparator while achieving a 120ns propagation delay.…
MAX999 Single/Dual/Quad, Ultra-High-Speed, +3V/+5V, Beyond-the-Rails Comparators The MAX961–MAX964/MAX997/MAX999 are low-power, ultra-high-speed comparators with internal hysteresis. These devices are optimized for single +3V or +5V operation. The input common-mode range extends 100mV Beyond-the-Rails™, and the outputs can sink or source 4mA to within 0.52V of GND and VCC. Propagation delay is 4.5ns (5mV overdrive), while supply current is 5mA per comparator.…
GSM/GPRS/GNSS MC60 Test Evaluation Adaptor (TE-A) Test Evaluation Adaptor to be used with GSM EVB kit for test and Evaluation. Quad-band full-featured GSM/GPRS module using LCC castellation package. integrated the GNSS technology for satellite navigation. Based on the latest 2G chipset. Price Quantity Quantity 1 – 24 = €32.59
GSM/GPRS/GNSS MC60E Test Evaluation Adaptor (TE-A) Test Evaluation Adaptor to be used with GSM EVB kit for test and Evaluation. Quad-band full-featured GSM/GPRS/GNSS module using LCC castellation package. It is fully pin-to-pin compatible with Quectel MC60 module, and supports both BT4.0 and BT3.0 specifications. Price Quantity Quantity 1 – 24 = €32.59
MCA1101-20-3 20A 3.3V Current Sensor，Fixed Gain Output Current sensor based on MEMS technology with integrated Rsense and 4kv isolation alll in 16 pin SOIC package. Ev kits are available The MCA1101-20-3 is part of Aceinna’s new generation of fully integrated, isolated, current sensor ICs that provide industry benchmark performance for accuracy, bandwidth, and step response time. With total error as…
MCA1101-5-3 5A 3.3V Current Sensor，Fixed Gain Output The MCA1101-5-3 is part of Aceinna’s new generation of fully integrated, isolated, current sensor ICs that provide industry benchmark performance for accuracy, bandwidth, and step response time. With total error as low as 1.0% (typ), 3dB bandwidth of 1.5MHz with low phase delay, and <300ns transient response, the MCA1101-5-3 provides power designers with…
MM120-001547 2360B Portable Enclosure. MODEL 2360B - 4-CHANNEL ENCLOSURE Model 2360B Portable Enclosure includes all AC wiring. Accepts up to four ampliier modules. Contact FMG for Quote and Further Information
CURR SENSE XFMR ROGOWSKI 200A 200A Rogowski Coil Current Sense Transformer 50/60Hz 66Ohm Max 1.86mH Chassis Mount Price Quantity Quantity 1 – 24 = €3.09
Links to data sheet and manual. https://irp.cdn-website.com/c8a02381/files/uploaded/TEQNO_paqETS_Scanners_Datasheet_2022.pdf LTE / LPWA SCANNER Cost effective and easy to use LPWAN scanner (Cat-NB and Cat-M) for end-to-end network performance testing, site surveys, drive and walk tests and coverage mapping. Features: paqETS Assistant software with intuitive user interface (MS Windows, Android and Linux versions) Seamless integration with paqETS cloud for end-to-end network performance testing…
Visible Light LEDs, LED Lighting Color Z Power Red 625nm (Typ) 2-SMD, Gull Wing Exposed Pad LED RED 625NM WTR CLR SMD LED Lighting Color Z Power Red 625nm (Typ) 2-SMD, Gull Wing Exposed Pad R42180-RRR1E REF:TC111004-32 MOQ RESH Price Quantity Quantity 1 – 24 = €1.45 Quantity 25 – 99 = €1.35 Quantity 100 – 499 = €1.26
Quectel Wireless Solutions 5G R17 Redcap, 5G SA only, LTE CAT4, M.2 FF, Global version Cellular, Navigation BeiDou, Galileo, GLONASS, GNSS, GPS, LTE Transceiver Module 6GHz Antenna Not Included Surface Mount Contact sales@fmgelectronics.ie for quote and/or more information.
Quectel RG500Q is a series of 5G Sub-6GHz modules optimized specially for IoT and M2M applications. Adopting the 3GPP Rel. 15 technology, it supports both 5G NSA and SA modes. Price Quantity Quantity 1 – 24 = €161.68
Key features 5G Sub-6 GHz LGA module with 4G (LTE Cat 19), optimized for IoT and eMBB applications Worldwide 5G, LTE-A and WCDMA coverage Supports 5G NSA and SA modes Supports 5G 2CC Carrier Aggregation Spectrum multiplexing and significantly increased network capacity enabled with TM9 Contact FMG for a quote or more information
Description:M.2 to MINI PICe adaptor/convert card for evaluation Quectel 5G M.2 card products. For use with RM500Q & RM510Q products. N.B.:Need to purchase a M.2 module to interface with the EVB kit to evaluate whole system. Name: RM500Q EVB kits Order code: PCIECARDEVB-KIT RM500Q EVB KITS PCIECARDEVB-KIT Price Quantity Quantity 1 – 24 = €162.95
Quectel RM500Q-GL is a 5G module optimized specially for IoT/eMBB applications. Adopting the 3GPP Rel. 15 LTE technology, it supports both 5G NSA and SA modes. Designed in an M.2 form factor, RM500Q-GL is compatible with Quectel LTE-A Cat 6 module EM06, Cat 12 module EM12 and Cat 20 module EM20, which will facilitate customers to migrate from LTE-A to…
5G Sub-6, M.2 format, Single SDR 4+4 MCP, generic OC, USB interface by default 5G NR Sub-6GHz module M.2 form factor 30mm × 52mm × 2.3mm SA data rates: 2.4Gbps (DL) / 900Mbps (UL) NSA data rates: 3.4Gbps (DL) / 550Mbps (UL) Extended temperature range of -40°C to +85°C Price Quantity Quantity 1 – 24 = €204.80 Quantity 25 –…
RF ANT 910MHZ WHIP STR N FEM 910MHz ISM Whip, Straight RF Antenna 860MHz ~ 960MHz 5dBi N Type Female Connector Mount Price Quantity Quantity 1 – 24 = €44.22
High Voltage Comparator Operating Temperature Range -40 to 85 Package SOIC-14 DESCRIPTIONS The LM2901 is the quad comparators version, and the outputs can be connected to other open-collector outputs to achieve wired-AND relationships. It can operate from 3.3V to 32V, and have low power consuming 45µA (TYP) per channel. The LM2901 consist of four independent voltage comparators that are designed…
RS-485 Transceivers 3.3V to 5V, ±20kV IEC ESD and SOP8 Package Option Features • 3V – 5.5V Supply Voltage • Half-Duplex • Bus I/O Protection - ±20kV HBM ESD - ±6kV IEC 6100-4-2 Contact Discharge • Common-Mode Range: -7V to 12V • 1/8 Unit Load: Up to 256 Nodes on the Bus • Low Stand-by Current: <5uA • Temperature Range:…
RS-485 Transceivers 3.3V to 5V, ±20kV IEC ESD and SOP8 Package Option Features • 3V – 5.5V Supply Voltage • Half-Duplex • Bus I/O Protection – ±20kV HBM ESD – ±6kV IEC 6100-4-2 Contact Discharge • Common-Mode Range: -7V to 12V • 1/8 Unit Load: Up to 256 Nodes on the Bus • Low Stand-by Current: <5uA • Temperature Range:…
Low Noise Operational Amplifier Operating Temperature Range -40 to 125 Package SOIC-8 Single channel 10pA 3.7V/us 7MHz 700uV SOIC-8 Operational Amplifier ROHS Contact FMG for a quote or samples for evaluation.
Low Noise Operational Amplifier Operating Temperature Range -40 to 125 Package SOT23-5 CMOS Amplifier 1 Circuit Rail-to-Rail SOT-23-5 Contact FMG for a quote or samples for evaluation.
